http://www.golbaltour.com

Stainless Muffler Clamp - manufacturer, factory, supplier from China

(Total 24 Products for Stainless Muffler Clamp)

  • 3" Stainless Exhaust Flex Pipe

    3" Stainless Exhaust Flex Pipe

    • Brand: N/A

    • Packaging: Bubble Bags Packed In Carton

    • Supply Ability: 20000PCS/Year

    • Min. Order: 100 Piece/Pieces

    3 Stainless Exhaust Flex Pipe A flex pipe also sometimes known as a flex coupling is a section of bellowed steel that is designed to absorb vibrations from the engine and from the motion of the vehicle which prevents other components from being broken or cracked Some parts of the exhaust system such as exhaust...

    Contact Now

  • Carbon Steel Exhaust Band Clamps

    Carbon Steel Exhaust Band Clamps

    • Brand: Customized Brand

    • Packaging: Carton and pallet

    • Supply Ability: 5000 PCS PER MONTH

    • Min. Order: 100 Piece/Pieces

    This Exhaust Band clamp features to fit 63mm pipe diameter It provides high clamp loads with permanent distortion of the exhaust tube These clamps are easily welded you can use a Flux core welder and after cleaning the welds it looks great They re available in lap joint and butt joint styles for pipe diameters ranging...

    Contact Now

  • Preformed Exhaust Band Clamp Lap Joint

    Preformed Exhaust Band Clamp Lap Joint

    • Brand: Customized Brand

    • Packaging: Carton and pallet

    • Supply Ability: 5000 PCS PER MONTH

    • Min. Order: 100 Piece/Pieces

    This Preformed Exhaust Band clamp is Stainless Steel SS304 it is for the pipe diameter From 51 101mm It is simple to install and remove The Preformed Stainless Steel Exhaust Band Clamps seal better than U clamps flat band clamps Preformed bands allow linking of OD parts exhaust pipes to ID parts mufflers We offer this...

    Contact Now

  • 4 Inch V-Band Exhaust Clamp

    4 Inch V-Band Exhaust Clamp

    • Brand: Customized Brand

    • Packaging: Carton and pallet

    • Supply Ability: 5000 PCS PER MONTH

    • Min. Order: 100 Piece/Pieces

    These V Band clamps are designed to be used with V Band Flanges it is for the pipe diameter From 63 101mm Simple to install and remove We offer this kind of V band clamps with all kinds of sizes that you need And the material can be Aluminized Steel Stainless Steel 409 430 and 304 With this V band clamp it will save...

    Contact Now

  • Heavty Duty Exhaust Band Clamps

    Heavty Duty Exhaust Band Clamps

    • Brand: Customized Brand

    • Packaging: Carton and pallet

    • Supply Ability: 5000 PCS PER MONTH

    • Min. Order: 100 Piece/Pieces

    This Preformed Exhaust Band clamp is very nice excellent price and great quality they are easily welded you can use a Flux core welder and after cleaning the welds it looks great it is for theThey re available in lap joint and butt joint styles for pipe diameters ranging from 2 in to 5 in It is simple to install and...

    Contact Now

  • 2 1/2" Exhaust Zinc Plating Clamps

    2 1/2" Exhaust Zinc Plating Clamps

    • Brand: Customized Brand

    • Packaging: Carton and pallet

    • Supply Ability: 5000 PCS PER MONTH

    • Min. Order: 100 Piece/Pieces

    This Exhaust clamp is Mild Steel with Zinc Plating for a 2 1 2 pipe diameter U Bolt Clamp We offer all kinds of U Bolt saddle clamps You are welcomed to contact us for more information Our company is located at the high tech industrial developing zone in Jining Shandong Here we install modern efficient facilities in...

    Contact Now

  • Exhaust Band Clamps For Auto cars

    Exhaust Band Clamps For Auto cars

    • Brand: Customized Brand

    • Packaging: Carton and pallet

    • Supply Ability: 5000 PCS PER MONTH

    • Min. Order: 100 Piece/Pieces

    This Exhaust Band clamp is Stainless Steel SUS304 with polishing for a 2 1 2 pipe diameter U Bolt Clamp We offer band clamps with all kinds of sizes You are welcomed to contact us for more detailed information and customers size is welcomed We can make accordingly Our company is located at the high tech industrial...

    Contact Now

  • Chrome Exhaust Band Clamps

    Chrome Exhaust Band Clamps

    • Brand: Customized Brand

    • Packaging: Carton and pallet

    • Supply Ability: 5000 PCS PER MONTH

    • Min. Order: 100 Piece/Pieces

    This Exhaust Band clamp is Stainless Steel SS304 and Chrome finish it is for the pipe diameter From 51 89mm We offer band clamps with all kinds of sizes And the material can be Aluminized Steel 409 430 and 304 Stainless Steel And all kindly surface finish it can be mirro polishing chrome black paiting Zinc plating and...

    Contact Now

  • Stainless Steel 409 Stamped Flange

    Stainless Steel 409 Stamped Flange

    • Brand: N/A

    • Packaging: Bubble Bags Packed In Carton

    • Supply Ability: 40000PCS/Year

    • Min. Order: 100 Piece/Pieces

    Stainless Steel 409 Stamped Flange A flange is an external or internal ridge or rim lip for strength as the flange of an

    Contact Now

  • Stainless Steel Core Carbon Fiber Tips

    Stainless Steel Core Carbon Fiber Tips

    • Brand: Customized Brand

    • Packaging: Carton and pallet

    • Supply Ability: 5000 PCS PER MONTH

    • Min. Order: 100 Piece/Pieces

    This is a Carbon fiber Car Exhaust Tip with a very glossy surface and looks wonderful It features 54mm OD The ovral lenght can be from 150 230mm The edge is Slant cut beveled The logo can be engraved You can put you logo on We have Laser lettering machine Outer shell forms from real carbon fiber material The carbon...

    Contact Now

  • Stainless Steel Core and Shell Exhaust Tip

    Stainless Steel Core and Shell Exhaust Tip

    • Brand: Customized Brand

    • Packaging: Carton and pallet

    • Supply Ability: 5000 PCS PER MONTH

    • Min. Order: 50 Piece/Pieces

    This Exhaust Tip is Round with 51 63mm Inlet and 127mm outlet Straight Cut Tip Double Wall Measures 190 230mm in Length This exhaust tip looks great and add just the right final touch This tip is constructed first rate stainless steel This polished exhaust tip goes through a three stage polishing process for a...

    Contact Now

  • Round Double Wall Stainless Steel Exhaust Tips

    Round Double Wall Stainless Steel Exhaust Tips

    • Brand: Customized Brand

    • Packaging: Carton and pallet

    • Supply Ability: 5000 PCS PER MONTH

    • Min. Order: 50 Piece/Pieces

    This double wall Round Exhaust muffler Tip looks excellent by a brilliant mirror like finish It features 58mm Inlet ID and 101mm outlet Straight Cut double Wall Enhances his texture Measures 190mm in Length If you have other requirement welcome to let us know Both chrome and polishing finish available Chrome plated...

    Contact Now

  • Stainless Steel 304 Exhuast Tips

    Stainless Steel 304 Exhuast Tips

    • Brand: Customized Brand

    • Packaging: Carton and pallet

    • Supply Ability: 5000 PCS PER MONTH

    • Min. Order: 50 Piece/Pieces

    This Exhaust Tip is Round features 60 5mm Inlet ID and 127mm outlet Slant Cut Tip Single Wall The overall lenght is 190mm It is a fashion design style and a great accessory to dress up cars This muffler tip is constructed first class 304 stainless steel for durability Available in both weld on and clamp on styles Both...

    Contact Now

  • Stainless Steel Mirror like Polishing Tail Pipe

    Stainless Steel Mirror like Polishing Tail Pipe

    • Brand: Customized Brand

    • Packaging: Carton and pallet

    • Supply Ability: 5000 PCS PER MONTH

    • Min. Order: 100 Piece/Pieces

    This round exhaust tip is with 57 63mm Inlet ID and 101mm outlet Angle Cut Tip with a Double Wall and Beveled Edge Measures 190mm in length It is available in both weld on and clamp on styles Clamp on styles are easily mounted and installed in minutes with simple hand tools it is Made of high quality stainless steel...

    Contact Now

  • SCM5003 After Market Muffler Replacement

    SCM5003 After Market Muffler Replacement

    • Brand: N/A

    • Packaging: Bubble Bags Packed In Carton

    • Supply Ability: 20000PCS/Year

    • Min. Order: 100 Piece/Pieces

    SCM5003 After Market Muffler Replacement Cat back also cat back and catback refers to the portion of the exhaust system from the outlet of the catalytic converter to the final vent to open air This generally includes the pipe from the converter to the muffler the muffler and the final length of pipe to open air Cat...

    Contact Now

  • SCM5001 Exhaust System Muffler

    SCM5001 Exhaust System Muffler

    • Brand: N/A

    • Packaging: Bubble Bags Packed In Carton

    • Supply Ability: 20000PCS/Year

    • Min. Order: 100 Piece/Pieces

    SCM5001 Exhaust Muffler The gases from most types of machines are very hot the pipe must be heat resistant and it must not pass through or near anything that can burn or can be damaged by heat A chimney serves as an exhaust pipe in a stationary structure For the internal combustion engine it is important to have the...

    Contact Now

  • STR251 Ford Exhaust Muffler

    STR251 Ford Exhaust Muffler

    • Brand: N/A

    • Packaging: Bubble Bags Packed In Carton

    • Supply Ability: 20000PCS/Year

    • Min. Order: 100 Piece/Pieces

    STR250 Original Exhaust Muffler An unavoidable side effect of this noise reduction is restriction of the exhaust gas flow which creates back pressure which decreases engine efficiency This is because the engine exhaust must share the same complex exit pathway built inside the muffler as the sound pressure that the...

    Contact Now

  • STR256 Exhaust System Muffler

    STR256 Exhaust System Muffler

    • Brand: N/A

    • Packaging: Bubble Bags Packed In Carton

    • Supply Ability: 20000PCS/Year

    • Min. Order: 100 Piece/Pieces

    STR256 Exhaust System Muffler Some aftermarket mufflers claim to increase engine output and or reduce fuel consumption by dint of reduced back pressure This usually entails less noise reduction The legality of altering a motor vehicle s original equipment exhaust system varies by

    Contact Now

  • STR257 Flange Exhaust Muffler

    STR257 Flange Exhaust Muffler

    • Brand: N/A

    • Packaging: Bubble Bags Packed In Carton

    • Supply Ability: 20000PCS/Year

    • Min. Order: 100 Piece/Pieces

    STR257 Flange Exhaust Muffler An exhaust system is usually piping used to guide reaction exhaust gases away from a controlled combustion inside an engine or stove The entire system conveys burnt gases from the engine and

    Contact Now

  • Stainless Steel Direct Fit Hotdog

    Stainless Steel Direct Fit Hotdog

    • Brand: N/A

    • Packaging: Bubble Bags Packed In Carton

    • Supply Ability: 20000PCS/Year

    • Min. Order: 100 Piece/Pieces

    Stainless Steel Direct Fit Hotdog This Direct Fit Exhaust Hotdog Was Welded By Tig Welding The Flange is Laser Cutting The Surface Is Mirror Polishing The Body Was Packed With Fiber Glass Wool It Is Straight Flow Style It Is Warm Welcomed In Europe And US Market The Hotdog Size Is 5 Round Diameter The Hanger Is Welded...

    Contact Now

  • Remus Style Painting Muffler

    Remus Style Painting Muffler

    • Brand: N/A

    • Packaging: Bubble Bags Packed In Carton

    • Supply Ability: 20000PCS/Year

    • Min. Order: 100 Piece/Pieces

    Remus Style Painting Muffler Stainless Steel Exhaust Muffler With Remus Style Black Painting The Muffler Was Welded Spoggit By Tig Welding The Muffler Was Packed With High Quality Fiber GLass Wool The Muffler Size Is 8 5 x 5 Oval Size The Spoggit Is 50mm Long The Tip Is 200mm Long The Tips Was Mirror Polished It Is...

    Contact Now

  • STR250 Original Exhaust Muffler

    STR250 Original Exhaust Muffler

    • Brand: N/A

    • Packaging: Bubble Bags Packed In Carton

    • Supply Ability: 20000PCS/Year

    • Min. Order: 100 Piece/Pieces

    STR250 Original Exhaust Muffler Mufflers are installed within the exhaust system of most internal combustion engines The muffler is engineered as an acoustic device to reduce the loudness of the sound

    Contact Now

  • Round Universal Exhaust Muffler

    Round Universal Exhaust Muffler

    • Brand: N/A

    • Packaging: Bubble Bags Packed In Carton

    • Supply Ability: 40000PCS/Year

    • Min. Order: 100 Piece/Pieces

    Round Universal Exhaust Muffler This Kind Of Round Aluminized Muffler Is Seam Locking Style This Muffler Body Use 2 Layers 0 6mm Thickness Aluminized Steel By Seam Locking Machine The Perf Tube Is Straight Flow It Packed With High Quality Fiber Glass Wool It Can Stand High Temperature the Sound Is Great This Kind Of...

    Contact Now

  • 8.5"x5" Oval Exhaust Muffler

    8.5"x5" Oval Exhaust Muffler

    • Brand: N/A

    • Packaging: Bubble Bags Packed In Carton

    • Supply Ability: 20000PCS/Year

    • Min. Order: 100 Piece/Pieces

    8 5 x5 Oval Exhaust Muffler This Kind Of Muffler Was Aluminium Muffler Body The Muffler Was Packed With High Quality Fiber Glass Wool The Tip Was Welded On The Muffler Body by Tig Welding So The Muffler Looks Great The Muffler Body Is 8 5 X 5 Oval Size The Inlet Size Is 3 Diameter The Spoggit Lenght Is 100mm The Tip...

    Contact Now

Review

Mr.molina

Sep 28, 2019 5

I have received the product. I am worried about the quality before buying, but thank you very much for the service that JINING FAREAST LIANGFEI CONVERTER & MUFFLER CO. LTD team gave me.
Evgeny Studenikin

Sep 23, 2019 5

I thought to buy the some product in another place, but the price is too high. Very happy to find JINING FAREAST LIANGFEI CONVERTER & MUFFLER CO. LTD and get this Stainless Muffler Clamp . Very grateful!
Vigneswaran Appia

Sep 16, 2019 5

Get a bad product from another company. Thank you so much that JINING FAREAST LIANGFEI CONVERTER & MUFFLER CO. LTD can help me.
It adheres to the tenet "Honest, industrious, enterprising, innovative" to develop new products constantly. It regards customers, success as its own success. Let us develop prosperous future hand in hand for Stainless Muffler Clamp , stainless muffler clamp , stainless steel muffler clamps , we welcome customers to phone or e-mail us for cooperation.
"Our enterprise since its inception, often regards solution excellent as enterprise life, continually strengthen output technology, enhance product high quality and continually strengthen organization total high-quality administration, in strict accordance using the national standard ISO 9001:2000 for Stainless Muffler Clamp , stainless muffler clamp , stainless steel muffler clamps , We supply professional service prompt reply timely delivery excellent quality and best price to our customers. Satisfaction and good credit to every customer is our priority. We focus on every detail of order processing for customers till they have received safe and sound solutions with good logistics service and economical cost. Depending on this our products and solutions are sold very well in the countries in Africa the Mid-East and Southeast Asia.

Send Us a Message

We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.